Safety shoes: the production processes and kinds of leather

0
994
Reading time: 5 min
Safety shoes: the production processes and kinds of leather safetyshoestoday

You have to buy a new pair of safety shoes and you would like to know how the production process takes place? Do you know the different types of leather and the methods used to paste the soles to the shoes?Safety shoes: the production processes and kinds of leather safetyshoestoday

Also in this case knowing more about the techniques used by the specialized producers could be of great help.

How many different types of leather for safety shoes do exist? And what is the difference between the different types? Finally, what are the processes used to produce safety shoes?

In this article I will tell you about the different types of leather and the production techniques for making safety footwear.

We’ll talk about the fabrication methods of safety footwear of the following types:

• Class I (of leather or other non-polymeric materials)
• Design A (shoes), B (ankle boots), C (rangers)

A very important material: leather

Safety shoes: the production processes and kinds of leather

Leather is certainly the most important material involved in the production process of safety footwear. It’s obtained from the skin of animals such as calf or pig, and through several production steps it’s turned into a stable, strong and lasting material.

Depending on the type of treatment and on the different methods of production leather can absorb a variable amount of water vapor (that is it can be more or less breathable). It can also be waterproofed through a special technique called “water repellent treatment”.

Types of leather in safety footwear

According to the different uses and on the part of the skin it comes from, one can distinguish different types of leather:
• Full grain leather – it is part of the most outer layer of the skin, the most elastic and breathable of all.

• Printed leather – middle layer of the skin; it looks granular, due to the moulding. It’s very sturdy but less breathable, it’s often used for S2, S3, O2 and O3 products.

• Nubuck leather – the most outer layer of the skin, slightly brushed and with moderate resistance to scratches and hits.

• Suede leather – it’s part of the middle layer of the skin. It has the best durability and the least water resistance. It’s often used for S1, S1P, O1 and O1P products.

 

Safety shoes leather: Best “LEATHER SAFETY SHOES” picks by SafetyShoesToday

£26.89
£28.65
in stock
5 new from £26.00
Amazon.co.uk
Free shipping
£89.95
in stock
2 new from £89.95
Amazon.co.uk
Free shipping
£56.61
in stock
5 new from £46.11
Amazon.co.uk
Last updated on 04/07/2020 4:49 AM

 

Production process of safety footwear

Cutting of the leather

Safety shoes: the production processes and kinds of leather

A hydraulic press cuts the leather with a blade (which is called die). A different die is needed for each piece of the future shoe, and for each size.

Sewing

The die-cut pieces of leather are later sewn accurately with the aid of big and strong sewing machines.

Bonding and attaching

With a special rivet gun metal hooks and eyelets are attached to the shoe.

Shaping

The shaping is a very important process, during which the upper of the shoe receives its shape, thanks to the use of a wooden or plastic foot (called a shoetree), after which the sole can be attached to the upper. Obviously for each shoes model there is a specific shoetree, built specifically for it.

Production of the sole

The sole must go through several steps of processing before it can be attached to the other parts of the safety footwear, with the use of a pneumatic press. Right after joining the sole and the upper, the footwear is placed in a cooling chamber.

Removal of the shoetree

At this stage the shoetree, which gave the upper its form, is removed.

 

Safety shoes leather: Best “SUEDE SAFETY SHOES” picks by SafetyShoesToday

Last updated on 04/07/2020 4:49 AM

 

 

Different production methods of safety shoes

Different production methods are distinguished:

• The sole can be glued (cemented). In this process the upper and the sole are glued together. In this case the sole is fabricated first, with a separate machine. This is the easiest method and it can be applied to all sorts of soles.
• Another process is the injection of polyurethane, in which the sole of polyurethane is created and directly attached to the upper. The upper is placed into a mold (normally made of aluminum or Teflon), then polyurethane is injected into the mold, and when it cools it becomes solid and sticks to the upper. This process fixes together the upper and the sole very firmly.
• The soles can also be sewn, but this methods is being used less and less, for production efficiency reasons.

Finishing

During the final quality control all shoes receive one final touch and all secondary parts are assembled (like laces, zippers, other types of closures and so on), then the footwear is ready for the packaging.

Packaging

At this point the safety shoes are ready to be packaged and can undergo the regular security checks.

 

 

Safety shoes leather: Best “NUBUCK SAFETY SHOES” picks by SafetyShoesToday

Last updated on 04/07/2020 4:49 AM

 

What do you think about the several steps of the production of safety shoes and the Safety shoes leather?

Do you have any points to add?

Leave us a comment below!

Articolo precedenteQuick-release safety shoes
Articolo successivoSafety shoes for all seasons
Robert Frog
I was born in London in 1975 and still live here. I could define myself, summing up in a few words my long working career, a great expert in the field of foot and foot problems. Immediately after graduating in Motor Science I started working in an orthopaedics in which orthotics were made to measure for people with foot problems. In 1999 I was hired as Key Account Manager in a well-known chain of safety footwear and other personal protective equipment. Among my clients I had several industries, which I visited regularly to understand the needs of workers, both in terms of protection and comfort. During these years I have consolidated my knowledge on foot problems. Furthermore, I studied carefully the products I proposed: attending courses, participating in trade fairs and, often, accepting the invitation of manufacturers to visit the factories. I was thus able to observe closely the techniques and materials used to produce the best safety shoes. Since 2015 I have been collaborating with the PPE Academy for the content of Safety Shoes Today.

Nessun Articolo da visualizzare

LASCIA UN COMMENTO

Per favore inserisci il tuo commento!
Per favore inserisci il tuo nome qui