When you have to choose your new pair of safety footwear you need to know what types of leather it should have.
How many different types of leather for safety footwear are there on the market? What is the difference between the different types of leather?
Also in this case learning more about the technical plus invented by the manufacturers will help you a lot.
In this article I’ll explain to you technically what to do if you need safety shoes but you don’t know the type of leather that you might choose.
I bet you’ll be surprised by how easy it is to find the best product for your needs!
- You need safety footwear with high breathability?
- You need safety footwear with resistance to chemicals?
- You need low cost safety footwear?
- You need water resistant safety footwear?
There’s a huge variety of needs and you have to choose, let me explain to you technically what exists on the market, and what you have to look for to find the perfect type of leather for safety footwear for your needs.
Let’s start with some information on leather.
LEATHER: Even if manmade leathers are getting even more popular on the market, most safety shoes are made from natural leather. Leathers come from cows, buffalos, pigs depending if they are supposed to be used in uppers or linings. The leather is processed for becoming non putrescible. Leather is breathable, holds heat and resists to moisture.
Also distinguishing points of leather are durability, resistance to abrasion, protection against wind and rain, tear-resistance, sturdiness, high wearing comfort, plus it’s a renewable resource. On the other hand, the non uniformity of leather is a disadvantage, being it a natural product.
Let’s see the processing steps:
- The leather is separated from the animal manually or mechanically.
- First of all it will be dried and refrigerated or put under salt in order to avoid decomposition.
- The leather, before starting the tanning process, will be washed to remove salt and other components
- The hair will be chemically removed from the skin
- The remaining parts of flesh and fat will be mechanically removed
- The leather is split in layers, the most important one is grain leather, and then the split leather
Then the tanning process starts in salt of chrome III, the leather is called then WET BLUE. The PH of the leather tanned in salt of chrome is about 3 to 4, this is the PH of leather for safety footwear.
This tanned leather is now heat resistant up to 167 F degrees, water resistant (the water resistant leather), traction resistant, but also breathable.
After the tanning process the leather will be receiving a finishing process, it will be pressed in order to have a fix thickness, will be colored, will be transformed to smooth or grained or nubuck leather, in order to meet the customer needs, as of color, external finishing etc.
Many leathers are printed to give some aesthetical aspects, the mold for printing the leather goes up to 100 degrees to print it, and some lubricants based on silicone are used to avoid the leather sticking on the mold.
The water repellent leather has a content up to 8% of polymeric grease components. There are different levels of impermeability that leather can have.
Full grain leather can be more or less natural, depending on the flaws it has initially, because it will be (more or less) corrected with pigments or resins for a better look. Of course a more natural leather will be more breathable than the corrected one, but more expensive.
Nubuck is usually a grain leather that receives a soft scratching processing and then it could be used as it is, or can be added with oils to create the PULL UP effect.
Suede leather finishing is made from the split layers, the structure is very open and breathable.
Veals and pigs are used normally for creating some internal linings.
Let’s describe the types of leather:
- FULL GRAIN LEATHER: after the processing it still has the complete grain layer, as the grain layer is not corrected.
Best “LEATHER” picks by SafetyShoesToday
Amazon.com
Amazon.com
- NUBUCK LEATHER: is a particularly fine leather that has been lightly sanded on the grain side and therefore been given a satiny character. Because it remains water-resistant for a long time after waxing, it is used for safety footwear.
Best “NUBUCK” picks by SafetyShoesToday
Amazon.com
- SPLIT PRINTED LEATHER: Cowhides have a thickness of 0.2 to 0.4 inches, which makes it possible to split the leather more than once. Splitting describes the process of bringing the skin to a uniform thickness. This type of leather (especially the buffalo one) is the least expensive.
Best “PRINTED LEATHER” picks by SafetyShoesToday
Amazon.com
Amazon.com
Amazon.com
- SUEDE LEATHER: Suede is a generic term for a type of leather with a roughened surface.
Best “SUEDE LEATHER” picks by SafetyShoesToday
SYNTETIC LEATHERS AND TEXTILES:
- MICROFIBER: Microfiber term can be split in two terms to better understand: Micro-Fiber. Basically it is made of all very small fibers in fact they are measured in Dtex, between 0.5-0.7 dtex (1 dtex, decitex = 1 gram per 32800 feet of threading, so small and light to weighs 0.04 oz for every 32800 feet. It is many times confused with real leather, but again is a textile refined with PU.
Best “MICROFIBER” picks by SafetyShoesToday
Amazon.com
Amazon.com
- EXTERNAL TEXTILES: There are several types of textiles for the upper of a safety footwear but the main difference can be made from closed and open textiles, whose difference is breathability; the first ones are intended for water resistant footwear and the second ones for summer and breathable footwear.
Best “TEXTILE” picks by SafetyShoesToday
Amazon.com
Amazon.com
Amazon.com
- CORDURA: http://www.invista.com/en/brands/cordura.html and www.cordura.com Cordura® is a polyamide fabric. Cordura® fabrics are made with polyamide fibres which are spun again and then woven. This makes the fabric especially tear resistant. Cordura® is also lightweight and very breathable.
Now that you know more or less the different types of leather for safety footwear, let’s see some examples of products:
These are the solutions that I suggest when you’re looking for the best types of leather for safety footwear.
When you’ll have selected your safety shoe with the right type of leather you’ll be more protected and comfortable at work.
I promise that if you use the right type of leather for your safety footwear you’ll live a better working experience.
What do you think about the different types of leather for safety footwear?
Do you have points to add?
Please write your comments below!
