Safety shoes for foundries

Reading time: 5 min
safety shoes for foundries - safetyshoestoday

For sale there is a wide choice of safety footwear, and at first sight all products look the same. However, there are great differences between different types. My goal is to teach you how to distinguish the correct genre of safety shoes for each work environment. To be more precise, in this article I will talk about Safety shoes for shoes for foundries - safetyshoestoday

I will try to give you an idea of what type of safety shoes is the most appropriate for your workplace and, in general, for your needs.

Of course it is not possible to list all the potential risks, but those that follow are the most important.

I am sure that this article will help you to choose the perfect type of safety shoes for your needs.

Safety shoes for foundries: types of tasks

Safety shoes for foundries

In this kind of job one often works outside. Winter, summer, cold, hot, rain: any weather condition can occur. The right kind of safety footwear for your needs should protect your feet, but at the same time it should let them breathe, so that a good article of safety shoes suited for working in a foundry will be of great help.

But a job in this sector doesn’t involve a single task. Therefore, the risks are different according to the activity you perform, and so do the type of safety footwear you should wear.

The main jobs of the sector are:

• Metal recycling: in this type of job one must be very careful about the safety of his feet, because there are many risky situations such as hits, cuts to the sides, frontal impacts and bad falls due to sliding. Your safety footwear should therefore be made of sturdy materials. The best material for the outsole is nitrile rubber heat resistant and the upper must be of high-quality leather and equipped with a protective toecap.


Safety shoes for foundries: molten metals and laminating

Activities involving molten metal: if this is your job you will need specific foundry safety footwear, which will protect you against the potential contact with molten metals.

Laminating process: this job is normally carried out in very hot and damp environments. In such environments it is difficult to wear non water resistant safety shoes (although the use of water-resistant footwear is highly recommended), so a water resistant product is the best choice in this case. It is enough to make sure that the safety shoes you buy have a good breathability, to ensure a good level of comfort.


Safety shoes for foundries: finishing process and logistics of metal

Safety shoes for foundries

• Finishing process: some finishing processes are realized with chemical substances, therefore it is necessary to use sturdy shoes certified chemical resistant, much better if they are polymeric rain boots; if, on the other hand, you want to use regular safety shoes, you should at least look for a product equipped with nitrile rubber which is chemical and heat resistant.

• Logistics of metals: regardless of the way the logistical work is carried out you are going to need regular safety ankle boots with protective steel toecap, or safety shoes with metatarsal protection “MT”. Nowadays there are two different types of metatarsal protection, that is to say, internal and external.


Safety shoes for foundries: types of risks

After having seen a list of the main activities in this field, let’s now talk about the risks that your feet take if you work in a foundry.

Of course it is not possible to list all the potential risks of a job in this field, but the following are the most common. I am sure that this article will help you to choose the perfect type of safety shoes for your needs.

  • You must buy safety shoes to work, but you don’t know what features they should have?
  • You wish you had a clearer idea of the risks that you take every day in your job?

Now I am going to show you what the main risks for a worker in this sector are, to help you choose the perfect safety shoes for your needs.

  • What are the risks for your feet?
  • And what are the solutions that can be found for sale?

The main risks are:

Safety shoes for foundries

  • Low visibility;
  • Extremely slippery floor;
  • Burns due to molten metal;
  • Impacts or compressions in the toe area.

Safety shoes for foundries: types of protection and required characteristics

Almost every shoe type has versions that offer long-lasting protection. In this case, a valid article of Safety shoes for foundries must have the following characteristics:

  • Reflective stripes;
  • Protective toecap;
  • Protection from molten metal contact (foundry boots)
  • Puncture-resistance, “PR” marking;
  • Slip-resistance

Moreover, the outsole should be preferably made of nitrile rubber, whereas the toecap should be made of metallic material (steel or aluminum) and equipped with fast-release systems.

Safety shoes for foundries: required products

  • Water resistant safety footwear with nitrile rubber outsole.
  • Safety footwear with resistance to molten metal, foundry boots.
  • Metatarsal protection MT safety footwear
  • Chemical resistant rain boots


Best chemical protection safety boots, selected by SafetyShoesToday:

Last updated on 26/02/2021 8:23 AM

Best metatarsal protection safety shoes, selected by SafetyShoesToday:

in stock
12 new from $127.25
Free shipping
in stock
9 new from $141.95
Free shipping
in stock
6 new from $144.82
Free shipping
Last updated on 07/07/2020 9:26 AM

Safety shoes for foundries, what do you think?

These are the features that I recommend that you check if you are looking for the perfect pair of Safety shoes for foundries for your needs.

As soon as you get yourself the right product of Safety shoes for foundries, you will be much safer at work.

I guarantee that if you wear the right type of safety footwear, you will live a better work experience!

What do you think about the Safety shoes for foundries?

Do you have points to add?

Leave us a comment!

Articolo precedenteSafety shoes for workers in the car industry
Articolo successivoSafety shoes for special risks
Robert Frog
I was born in London in 1975 and still live here. I could define myself, summing up in a few words my long working career, a great expert in the field of foot and foot problems. Immediately after graduating in Motor Science I started working in an orthopaedics in which orthotics were made to measure for people with foot problems. In 1999 I was hired as Key Account Manager in a well-known chain of safety footwear and other personal protective equipment. Among my clients I had several industries, which I visited regularly to understand the needs of workers, both in terms of protection and comfort. During these years I have consolidated my knowledge on foot problems. Furthermore, I studied carefully the products I proposed: attending courses, participating in trade fairs and, often, accepting the invitation of manufacturers to visit the factories. I was thus able to observe closely the techniques and materials used to produce the best safety shoes. Since 2015 I have been collaborating with the PPE Academy for the content of Safety Shoes Today.

Nessun Articolo da visualizzare


Per favore inserisci il tuo commento!
Per favore inserisci il tuo nome qui